How To Tell Your stump grinder teeth Needs A Replacement

How To Tell Your stump grinder teeth Needs A Replacement

While operating stump grinders, sometimes you don’t have to wait until the machine breaks down to make teeth replacement. There are ways to identify the problem before things can get worse. The machine will always give signs that thugs are not okay. If you have been removing stumps for some time, then identifying such signs would not be a big problem. However, the newbies in the forestry industry, what signs should they look out for? Well, here signs that your machine needs teeth replacement:

Reduced Productivity

One of the critical things that should always guide you is the productivity of the machine. When the grinder is new or in good condition, the output is always high since it operates almost to a peak performance. But with time, you might start experiencing a reduction in productivity and that should tell you something. However, if you notice a sudden or gradual reduction in productivity, then you need to check the condition of the teeth. In most cases, the teeth may have gotten dull and blunt thus making it difficult for the machine to grind effectively. In such cases, there is a high possibility that the machine may need a replacement.

Machine Won’t Grind Effectively

In some cases, you might find out that you have the machine is not cutting effectively as it should be. For instance, you might find out that it is leaving rough patches along the line of grinding thus affecting the rate at which you are grinding. In such cases, there is a possibility that the one or several stump grinder teeth are broken. If that is the case, then you have no other choice rather than making a replacement.

Grinder Won’t Cut

Cases, where the grinder won’t cut, are rare, but they also happen. If you are working under extreme condition, such as rocky areas or areas littered with metal pieces, you stump grinder teeth are exposed to the high rate of wear and tears. They might grindstones or metals thus breaking them off. When a significant number of the centre teeth is broken, it will be almost impossible for the machine to cut effectively. Under such cases, your machine may never grind all or may come to a halt. In such cases, you definitely need to replace some stump grinder teeth to keep the machine working.

These are main signs to when you stump grinder machine needs a teeth replacement. Observing them ensures that you are getting constant output from your grinder.

Tips To Improve Your Weld-on Carbide Teeth Performance

Tips To Improve Your Weld-on Carbide Teeth Performance

Weld-on carbide teeth are indisputably some of the best performing types of teeth in the drilling works. Whether you are doing poling or foundation drilling, these are teeth can deliver excellent output. However, just like the rest of the industrial wear parts, weld on carbide teeth are also prone to wear and abrasion. The two are also the leading causes of low performance of the drilling equipment. However, there are simple ways that you can improve the performance of your weld-on teeth.  After reading this article, you will never have a problem of poor performing weld on carbide teeth.

Shank Sharpening

The most important part of the weld-on carbide tooth is the shank. That is the part that will do the actual cutting, and thus prone to a high rate of wear down. They will become dull or blunt and making it difficult to grind the soil effectively. In such cases, the production of the drilling equipment may go down thus a reduction in performance. There are different ways that you can get the shank back in shape. The most effective way to achieve this is by sharpening the carbide shank to regain its original condition. The best way to go about this is sharpening the tip using a grinder. However, this method requires that you get some skills or have someone do it for you.

Replacement of the Carbide Tip

Just like the rest of the carbide teeth may have their tip removed and replaced with a new one,  the same is to the weld on carbide teeth. Although they do not have the same joint (welded joint) as the rest of the carbide teeth, it does not mean the tip cannot be replaced. If the carbide shank is beyond repair, then you should consider having it replaced. However, this can only be done by a specialized technician. By replacing the worn down carbide tip with a new one, the teeth will be entirely new. That should improve the performance of the drilling equipment.

Make Replacement

Regular repairs are critical to keeping your machine operating in the best condition. However, if the tooth is too worn down to a point where even repairs cannot salvage it, then you should consider a replacement.  That is another that you can improve the over performance of the weld on carbide teeth. However, the quality of the alternative should also be observed.

How To Do Proper Stump Grinder Maintenance

How To Do Proper Stump Grinder Maintenance

Whether you are operating a yellow jacket stump grinder or any other stump grinding equipment, proper maintenance is a subject that cannot be ignored. Note that there are numerous benefits associated with a well-maintained stump grinding machine. Whether it is a newly bought machines or just looking to extend the longevity of an old one, getting your grinder properly maintained can help in improving its performance, productivity and durability. But how do you do it right? Here are tips on how to do proper stump grinder maintenance.

Teeth Maintenance

Your Yellow Jacket teeth maintenance is critical to the overall performance of the machine. It also improves the productivity and the overall output of the stump grinder. If your teeth are poorly maintained, they become dull and blunt thus making it difficult for the machine to grind the stumps effectively. Therefore, making sure that you have done proper maintenance of the teeth is critical. Teeth sharpening and rotating when necessary are two ways that you can improve the performance of the machine.

However, you must also pay attention to the parts of the teeth that do the actual cutting. From the design of the cutting disc and arrangement of the teeth, the centre teeth do the most cutting while the outer teeth move the material. Therefore, the centre teeth should be check and maintained more regularly.

Keep the Wheel Balanced

The condition of the wheel or the disc is essential when it comes to the stump grinding. In most cases, the wheel is ignored, and yet, it has a significant influence on the overall outcome of the machine. The wheel should be checked for balance. The best to go about this is by making sure that you whatever is on the one side of the wheel is also on the other side. That is the balance that is needed to help optimize the performance of your stump grinder.

Check the Tightness of the Teeth

As you check the sharpness of the teeth, it is also important to have the tightness of the teeth checked regularly. In most cases, the bolt heads holding the teeth Yellow Jacket teeth in place will actually wear down quicker than the cutting teeth themselves. Therefore, you must always ensure that they correctly tightened to avoid freak accidents while working. You must also change the bolt heads regularly before they wear down or they will give you a heck of time getting the teeth off with a wrench.