How To Tell Your stump grinder teeth Needs A Replacement

How To Tell Your stump grinder teeth Needs A Replacement

While operating stump grinders, sometimes you don’t have to wait until the machine breaks down to make teeth replacement. There are ways to identify the problem before things can get worse. The machine will always give signs that thugs are not okay. If you have been removing stumps for some time, then identifying such signs would not be a big problem. However, the newbies in the forestry industry, what signs should they look out for? Well, here signs that your machine needs teeth replacement:

Reduced Productivity

One of the critical things that should always guide you is the productivity of the machine. When the grinder is new or in good condition, the output is always high since it operates almost to a peak performance. But with time, you might start experiencing a reduction in productivity and that should tell you something. However, if you notice a sudden or gradual reduction in productivity, then you need to check the condition of the teeth. In most cases, the teeth may have gotten dull and blunt thus making it difficult for the machine to grind effectively. In such cases, there is a high possibility that the machine may need a replacement.

Machine Won’t Grind Effectively

In some cases, you might find out that you have the machine is not cutting effectively as it should be. For instance, you might find out that it is leaving rough patches along the line of grinding thus affecting the rate at which you are grinding. In such cases, there is a possibility that the one or several stump grinder teeth are broken. If that is the case, then you have no other choice rather than making a replacement.

Grinder Won’t Cut

Cases, where the grinder won’t cut, are rare, but they also happen. If you are working under extreme condition, such as rocky areas or areas littered with metal pieces, you stump grinder teeth are exposed to the high rate of wear and tears. They might grindstones or metals thus breaking them off. When a significant number of the centre teeth is broken, it will be almost impossible for the machine to cut effectively. Under such cases, your machine may never grind all or may come to a halt. In such cases, you definitely need to replace some stump grinder teeth to keep the machine working.

These are main signs to when you stump grinder machine needs a teeth replacement. Observing them ensures that you are getting constant output from your grinder.

Tips To Improve Your Weld-on Carbide Teeth Performance

Tips To Improve Your Weld-on Carbide Teeth Performance

Weld-on carbide teeth are indisputably some of the best performing types of teeth in the drilling works. Whether you are doing poling or foundation drilling, these are teeth can deliver excellent output. However, just like the rest of the industrial wear parts, weld on carbide teeth are also prone to wear and abrasion. The two are also the leading causes of low performance of the drilling equipment. However, there are simple ways that you can improve the performance of your weld-on teeth.  After reading this article, you will never have a problem of poor performing weld on carbide teeth.

Shank Sharpening

The most important part of the weld-on carbide tooth is the shank. That is the part that will do the actual cutting, and thus prone to a high rate of wear down. They will become dull or blunt and making it difficult to grind the soil effectively. In such cases, the production of the drilling equipment may go down thus a reduction in performance. There are different ways that you can get the shank back in shape. The most effective way to achieve this is by sharpening the carbide shank to regain its original condition. The best way to go about this is sharpening the tip using a grinder. However, this method requires that you get some skills or have someone do it for you.

Replacement of the Carbide Tip

Just like the rest of the carbide teeth may have their tip removed and replaced with a new one,  the same is to the weld on carbide teeth. Although they do not have the same joint (welded joint) as the rest of the carbide teeth, it does not mean the tip cannot be replaced. If the carbide shank is beyond repair, then you should consider having it replaced. However, this can only be done by a specialized technician. By replacing the worn down carbide tip with a new one, the teeth will be entirely new. That should improve the performance of the drilling equipment.

Make Replacement

Regular repairs are critical to keeping your machine operating in the best condition. However, if the tooth is too worn down to a point where even repairs cannot salvage it, then you should consider a replacement.  That is another that you can improve the over performance of the weld on carbide teeth. However, the quality of the alternative should also be observed.

How To Do Proper Stump Grinder Maintenance

How To Do Proper Stump Grinder Maintenance

Whether you are operating a yellow jacket stump grinder or any other stump grinding equipment, proper maintenance is a subject that cannot be ignored. Note that there are numerous benefits associated with a well-maintained stump grinding machine. Whether it is a newly bought machines or just looking to extend the longevity of an old one, getting your grinder properly maintained can help in improving its performance, productivity and durability. But how do you do it right? Here are tips on how to do proper stump grinder maintenance.

Teeth Maintenance

Your Yellow Jacket teeth maintenance is critical to the overall performance of the machine. It also improves the productivity and the overall output of the stump grinder. If your teeth are poorly maintained, they become dull and blunt thus making it difficult for the machine to grind the stumps effectively. Therefore, making sure that you have done proper maintenance of the teeth is critical. Teeth sharpening and rotating when necessary are two ways that you can improve the performance of the machine.

However, you must also pay attention to the parts of the teeth that do the actual cutting. From the design of the cutting disc and arrangement of the teeth, the centre teeth do the most cutting while the outer teeth move the material. Therefore, the centre teeth should be check and maintained more regularly.

Keep the Wheel Balanced

The condition of the wheel or the disc is essential when it comes to the stump grinding. In most cases, the wheel is ignored, and yet, it has a significant influence on the overall outcome of the machine. The wheel should be checked for balance. The best to go about this is by making sure that you whatever is on the one side of the wheel is also on the other side. That is the balance that is needed to help optimize the performance of your stump grinder.

Check the Tightness of the Teeth

As you check the sharpness of the teeth, it is also important to have the tightness of the teeth checked regularly. In most cases, the bolt heads holding the teeth Yellow Jacket teeth in place will actually wear down quicker than the cutting teeth themselves. Therefore, you must always ensure that they correctly tightened to avoid freak accidents while working. You must also change the bolt heads regularly before they wear down or they will give you a heck of time getting the teeth off with a wrench.

The Road Milling Bits Shank: Why Quality Matters

The Road Milling Bits Shank: Why Quality Matters

The road milling machine is the most specialized machines in the industry today. These machines are extremely powerful depending on the size and capacity of the individual equipment. However, their performance is highly dependent on the quality if the cutting tools- the road milling bits. As part of the of the machine wear parts, their quality matters a lot. But the most important part of the road milling bit is the shank. That is the tip of the bit that is in contact with the work surface.

The bit shank is the main cutting part of the bit. That is why its quality significantly affect the overall productivity of the road milling machine. However, in this case, the term quality implies to the quality of the material used for the construction of the machine. The best quality shank should be constructed from tungsten carbide material. But why should the quality of the bit shank matter? Well, there are numerous reasons why you should always consider the quality of the bit shank why purchasing. Here some of the key reasons:

The productivity of the road milling machine is one of the key reasons why the quality of the bit shank should be considered. The effectiveness and swiftness with which the bit cuts with will affect the overall out of the machine. If you have poor quality teeth, it will be difficult for the machine to cut swiftly and thus you will definitely record low output. On the other hand, carbide tipped road milling bits have high productivity leading due to their sharpness and resistant to properties.

Operation cost with carbide tipped bits is also very low. The high cost of operation is one of the many problems that most people are struggling. Most of this cost is associated with high rate of wear of the wear parts. However, carbide material comes with wear resistance and resistance to abrasion properties. With such features, carbide tipped shanks recorded very little wear, and that reduces the cost of operation significantly. The cost maintenance also decreased considerably since fewer repairs and replacements are done.

Last but not the least is an extended lifespan of the milling bit and the machine. The fact that the road milling bit tip is less affected by the wear and abrasion gives it extended useful life. Quality shank also maintains a high machine efficiency which is essential for the overall equipment’s lifespan.

Beginners Guide to Buying Quality Tub Grinder Parts

Beginners Guide to Buying Quality Tub Grinder Parts

One of the major challenges that most people are struggling with in the market is getting quality wear parts for their machines. The market has become very tricky for the new time buyers, especially with the infiltration of fake and counterfeit products. But genuine manufacturers are still churning out good products every day. However, the trick is how you get their products and avoid coming into contact with the fake ones. If you are buying tub grinder parts, you can easily get the right quality product without a struggle if you choose to do it right. Here are the secrets that can help you get the right quality machine wear parts.

Reputable Manufacturer

Only a good manufacturer can guarantee quality products. By good, we mean someone who has built a reputation for producing quality products. Second, they must have been in the industry for a while so that they can build the required capacity. Therefore, it is important to check the brand that you are buying and if they have a good name in the industry. There are many companies producing quality tub grinder parts and you just need to go for their products. For instance, VERMEER, CBI, DURA TECH and many other brands of repute is readily available in the market. Avoid companies that are introducing their brands.

Check the Grade of Material Used

A tub grinder part is known by the quality of the material that has been used constructing it. However, the most recommended materials are the carbide and steel- if you are buying cutting wear parts. In most cases, you will find companies saying that their products are made from carbide and steel without disclosing the grade of the material used. For the cutting edge or the tip, it should be tungsten carbide and not any other carbide material. For the body, confirm that they have used the best quality steel. That is the only way that the quality if the tub grinder parts will be guaranteed.

Don’t Go Cheap

Cheap is expensive and for you to get good quality, you must be ready to invest more money. Unfortunately, that is something that most people are not willing to do. Note that the best quality tub grinder parts are a little bit expensive compared to other brands. Therefore, you must avoid being price driven but being quality driven. With that attitude, you will be able to buy the best quality wear parts for your grinder machine.

These Hacks Will Improve Auger Rock Bits Productivity

These Hacks Will Improve Auger Rock Bits Productivity

If you have spent time doing serious drilling, then you have an idea of how valuable auger rock bits can be. You must also have an idea of how to enhance the rock bit productivity. However, most of the operators, especially the newbies, have no idea on how to make their drilling tools produce at peak performance. Well, worry no more if you are among the newbies. In this article, we are going to look at some of the key factors that can help you improve the productivity of you. Check out these two factors.

Regular Sharpening

Keeping the condition of the rock auger teeth in the good conditions is one of the crucial factors when it comes to the drilling effectiveness. Rock bits are exposed to very tough conditions and they are likely to wear the tip faster. As you continue drilling, the tip of the teeth will start deteriorating and thus the need to have it restored from time to time. One of the best ways to achieve that is by the sharpening drilling teeth from time to time. However, make sure that you have used the right grinder to sharpen the tip. If you can’t do it yourself, hire a professional to do the sharpening.

Cooling Bits

Cooling the rock auger teeth is another key way of improving the auger productivity. Make sure that you made the right cooling system in place to keep the bit working effectively. Due to the high amount of heat that is produced while drilling rocky soils, the rate of wear and tear is like to increase significantly. If that is the case, the productivity of the bit and the auger machine is like to reduce significantly. There are numerous ways that you can get the bits cooled without compromising the performance if the auger machine. One of the best ways is to remove the auger from the hole at certain intervals. That way, you will allow the bit to be cooled by the air as well as allows hot air to escape from the hole. It is great for poling

Use of water is one of the most effective cooling methods for the foundation drilling. Make sure that you have used plenty of water since foundation drilling produced quite a lot of heat.

These are the two best ways that you can ensure that you have increased the productivity of the auger rock bits. However, you need to ensure that you have the right tools and if you don’t, hire a professional to the work sharpening.

Tips To Discerning A Good Refurbished Bandit Tub Grinder

Tips To Discerning A Good Refurbished Bandit Tub Grinder

When it comes buying a wood chipping equipment, there are a two thing that you need consider carefully. First, you need to make a decision depending on the kind budget that you have. The main option that you have is between a new tub grinder parts or a refurbished one.  If you have a problem financing a new wood chipper, then a refurbished one would be the perfect solution. However, there are a few things that you need to get right to ensure that you have gotten the right machine.

Buying a refurbished bandit tub grinder is highly preferred by most people due to its numerous advantages. First, you will save a lot of money from these machines which can be used for other purposes. Second, you will enjoy the same services as the one who bought new equipment. However, unlike buying a new machine, refurbished ones can be a little bit tough to deal with. You need to consider the factor that machine could be exaggerated and thus may not provide the expected resulted. That is why tips for discerning a good refurbished bandit tub grinder are important. Here are some of the critical tips:

First, you must get the actual age of the machine. This is something that usually hidden by some dealers and unless you ask. But why is it important? We all know that for a machine to be called ‘refurbished’, it must have been used sometimes. This is period that it could have been used is very crucial and it determined the overall quality of the machine. They may have changed most of the bandit tub grinder parts but other areas such as the engine parts could be in a bad shape. In such cases, the exterior could be good but the interior could be a problem.

Second, you need to get it right when it comes to bandit wood chipper parts. The fact that the machine is said to be refurbished does not mean that it is entirely new. Depending on the dealer that you are dealing with, they might end up replacing some parts and leaving the rest. Make sure that you have checked the quality of the tub grinder parts to ensure that everything is okay.

Last but not the least is the price that the bandit wood chipper selling at. That is one of the best ways that you can tell whether the tub grinder is good or not. If the machine is selling cheap, then you need to think twice. A relatively new and refurbished machine would be quoted at a relatively higher price.

4 Tips For Buying Used Fae Mulcher Forestry Teeth

4 Tips For Buying Used Fae Mulcher Forestry Teeth

If your FAE forestry mulcher needs teeth replacement, buying a new one may be costly, especially if you are struggling with cash. Going for used teeth could be the best option for you. Unlike what some people tend to think, used mulcher teeth can be as good as new one. But you will need to be extra vigilant since some of the dealers cannot be trusted. Here are key tips that can help you get the best teeth:

Teeth Taste Quality

The quality of teeth is a critical feature to consider while buying used teeth. There are different ways that you can tell whether the quality of the teeth is good or not.  One of the best ways is to check the quality of material used in its construction. Most important to check is the tip of the Fae teeth and also the body. If you will be mulching tough vegetation, then you need to have the tip made from tungsten carbide. Carbide is best known due to its impressive properties such as withstanding the extreme condition. For the body, premium steel is highly recommended.

The Age

If you are buying used FAE forestry mulcher teeth, it is highly recommended that you check the age of the teeth. You don’t want to buy teeth that will break down few months down the line. If you end up buying teeth that have been used for a very long time, they may not give value for the money.  Make sure that the teeth have just been for not long. A few months or one year utmost would be enough.

Underfoot Condition

The nature of the surface is a significant determining factor while opting for FAE mulcher teeth. If the ground is rocky, soft, or frozen, it requires teeth that excel best under such conditions. That is why it is important to put the factor of age into consideration. It will also help you to determine the kind of Fecon mulcher teeth you’ll need to handle the work efficiently.

Size

The size of the FAE mulcher teeth is also an important tip to consider while buying used teeth. The size of the teeth will greatly determine how the mulching machine works. If the teeth have been used for long, they are likely to reduce in size and that will compromise their ability to deliver peak performance. Therefore ensure that you have taken care of the size to ensure its effectiveness.

Look For These Features in Pengo Auger Parts

Look For These Features in Pengo Auger Parts

Whether it is foundation drilling or poling, one thing that is critical for perfect drilling is the quality of the Pengo auger parts. Like any other drilling tools, Pengo augers are not exempted from wearing off due to the tough conditions they are exposed to. That means replacement would be necessary to maintain a constant performance of your auger. So if you are looking for Pengo auger parts replacements, what should you look out for? Here are the key features that you need to consider carefully.

Extreme Versatility

Versatility is a critical feature that you need to look for in any Pengo auger for sale. Due to the nature of the changing soil nature, then it will be only advisable that you consider having the kind of teeth that can be used in all these conditions. That is versatility should feature as one of the key guides while choosing Pengo auger teeth and other parts. For instance, if you are shopping for Pengo auger teeth, then it will be important to ensure that they can be used on both abrasive and rocky soils. That is the only way that you can be assured of versatility. With such kind of teeth, it will not be necessary to keep changing your teeth now and then.

Compatibility

How compatible is the kind of teeth that you are planning to invest? Can it be used on other brands of auger? If you have some auger brands at your disposal, then it is only wise that you invest in the kind of teeth that is compatible almost all brands. That is when it is recommended that your divorce from buying OEM brands since they may fail to provide the compatible feature. So if you have a digga or Bobcat auger, ensure that the Pengo Teeth you are buying are compatible with such brands. That is how you will be able to cut on the cost of maintenance and more so the cost of replacement.

Durability

The longer the Pengo auger teeth serve you, the better. It simply means that the teeth have given value for the money. Therefore, durability is a critical feature, but it is mostly determined by the quality of the material used in the construction of the teeth. Always make sure that the teeth are made from the highest grade of a steel body and tungsten carbide for the tip.  These are the most recommended material since they also improve output and thus giving value for the money.

 

Tips on How to Get the Best Carlton stump grinder parts

Tips on How to Get the Best Carlton stump grinder parts

Getting parts for your Carlton stump grinder is never that easy.  You have to do due diligence to ensure that have obtained the right parts. Just like the rest of the products on the market, numerous counterfeit and fake products makes it difficult for the operators to select quality products. But for those who are diligent enough, they can still manage to get the best quality materials on the market.  So how can you ensure that you are getting the right stump grinder parts? Well, here are tips on how to get the best Carlton stump grinder parts.

Buy from a reputable Manufacturer

The brand is among the most important factors in the industrial tools and machines. Make sure that you are buying from one of the most reputable industrial tool manufacturers. But how do you know that you have settled on reputable producer? First, if you have a Carlton stump grinder, it is important to buy replacement parts from the same manufacturer. That will ensure that you have gotten the right parts for your stump grinding machine. If you cannot find the original manufacturer, then it will be advisable that you select from the compatible and reputable brands. For instance, you can choose from brands such as VERMEER, BOBCAT or GREEN TEETH amongst others. You should avoid buying from new entrants since most could be selling inferior quality products.

The Material Used Carefully

The quality of the material used in the manufacturing of the parts is an important factor to consider. It is a feature that significantly determines the quality of the stump grinder part that you are buying. With so many materials on the market, it is important to check which one you are buying and more depending on the parts that you are buying. If you are buying stump grinder teeth, it is important that you buy from the highest grade material. Tungsten carbide is recommended material for the tip while the body should be made from high-quality steel material.

Expected Lifespan

Lifespan is all about how long the parts are likely to serve. Making replacement should take you some time before you can think of going to the market again. The expected lifespan of Carlton stump grinder parts can be determined in different ways. The most important thing should be the quality of the material as mentioned above. But the manufacturer would always have an estimate of the period their wear parts can remain viable. Select for the parts that can serve you for an extended period.